YVAR STUDIO
Personalised mini box keyring
A little box to take with you, personalised with your identity. Your logo or text is inlaid on the outside of the lid. From 35 identical pieces.
35 to 100 identical units per batch. Contact us for larger quantities.
Your website, social profile or contact page. The same link will be used for every item in the batch.
Choose two different colours so the design on the back remains visible.
Your personalisation
Colour logo or text inlaid on the outer lid. The inside, hinge and closure remain clear.
PNG only, up to 8 MB. A transparent background and clean lines give the best results.
Small secondary lettering may be removed and fine lines strengthened. The preview shows the adapted artwork. Details needing review are flagged for a manual YVAR check before production; empty artwork or artwork outside the allowed area must be corrected.
Is the logo background detected incorrectly?
1 to 12 characters. Letters, numbers and simple punctuation. The same text will appear on every item in the batch.
The keyring will be made without a logo or text.
Select the main logo
Drag with your finger or mouse to select the part to keep. Small secondary text is removed automatically while the option is enabled.
Design size and position
View production outline
Geometric simulation with a 0.42 mm line width. This is not Bambu Studio slicing: actual paths and results depend on printer settings.
Back
On the back, the artwork is embedded flush in a 54 × 8 mm strip, as on the reference model. Short text or a wide logo works best.
PNG only, up to 8 MB. A transparent background and clean lines give the best results.
Small secondary lettering may be removed and fine lines strengthened. The preview shows the adapted artwork. Details needing review are flagged for a manual YVAR check before production; empty artwork or artwork outside the allowed area must be corrected.
Is the logo background detected incorrectly?
1 to 12 characters. Letters, numbers and simple punctuation. The same text will appear on every item in the batch.
The keyring will be made without a logo or text.
Select the main logo
Drag with your finger or mouse to select the part to keep. Small secondary text is removed automatically while the option is enabled.
Design size and position
View production outline
Geometric simulation with a 0.42 mm line width. This is not Bambu Studio slicing: actual paths and results depend on printer settings.
Drag the design on the stand. The dotted line marks the available area. Arrow keys move the design; + and − only change the zoom.
Drag to rotate. Use the wheel or pinch with two fingers to zoom.
Illustrative preview of the 3D model and PLA Basic colours. Printed shades and surface texture may vary.
Open model: approximately 44.5 × 83.5 × 13.2 mm.
Your personalised batch
Tax included. Shipping calculated at checkout.
Get help with my personalisationCheck my cartGet help with my personalisation